How to Put Drawer Pulls on Cabinets
The Best How To Put Drawer Pulls On Cabinets References. 0% apr financing for 12 months*. If you are measuring in millimeters and need to find the dimension in inches, take the number of millimeters and divide by 25.4.
The cabinet door handles are put on the opposite side of the door hinges. The bolts need to poke all way through hole. I have always been a big fan of cup pulls.
The Template Is Essential For Several Reasons:
Gold hardware pulls and white shaker cabinets. Push the bolt through the drawer from the backside. So that you’ll place the pulls at the correct distance from the door corner.
Insert The Fastening Screw (S) Through The Backside Of The Hole.
Hold the bolt stable with your finger. If you’re looking for a more modern aesthetic, place the hardware horizontally, as in this bamboo kitchen. For the drawers i selected these gorgeous 3″ solid brass cup pulls by century in a matte satin nickel finish.
Line Up A Knob With The Top Of The Bottom Door Rail.
For base cabinets, the top screw of your pull will be placed between 2 ½ and 3 inches from the top corner of the cabinet (opposite the hinges) and the bottom screw will be. Adjust a compass to match the distance between the centers of the handle's. You need to use a ruler or tape measure and hold it onto one screw hole’s center area.
Use Painter’s Tape On The Drill Bit At Half Or 1/8 Inch From The Tip.
Place the washer on the bolt and hold it in place with the nut. If you're not sure about where the knobs and pulls are to be installed, stick a piece of reusable putty adhesive to the hardware and try out. Turn the pull clockwise to tighten it onto the bolt from the face of the drawer.
These Knobs Came From Hobby Lobby.
The 32.5 and 35.5 will be drawer stack. Slide the threaded bolt into the 2 holes in. Mark the tape with your pencil.
0 Response to "How to Put Drawer Pulls on Cabinets"
Post a Comment